Resina fotopolimerizable para impresora 3D, resinas a base de PMMA de termocurado, cámara de post-polimerización, rugosidad superficial, pulido

Contenido principal del artículo

Karen Mireya Taimal Valencia
Pablo Ruben Garrido Villavicencio

Resumen

La rugosidad superficial juega un papel muy importante a la hora de evaluar los materiales dentales, ya que influye en su vida útil, el objetivo de este estudio fue evaluar la rugosidad superficial de resinas fotopolimerizables para impresoras 3D y resinas a base de PMMA. Metodología: Se realizaron 20 muestras de 25*25*3 mm, se dividieron en dos grupos: grupo A (n=10) resinas fotopolimerizables para impresora 3D y el grupo B (n=10) resinas a base de PMMA de termocurado. Las muestras del grupo A se diseñaron en el software Meshmixer y se organizaron en Photon Workshop 6.4 DLP 3D con una orientación de 0°. La impresión se realizó en una impresora DLP modelo Photon Ultra (Anycubic, Hong Kong-China). Posteriormente, las muestras se lavaron con alcohol isopropílico (90%) durante 5 minutos. Para el post-polimerizado, se utilizó una cámara de curado diseñada en un proyecto de la facultad, aplicando una potencia de 45 vatios y una longitud de onda de 400 a 470 nm durante 16 minutos. Las del grupo B se realizaron a partir de muestras fabricadas con acrílico de autocurado, se les tomó impresiones creando llaves de silicona de condensación, se colocaron en muflas para la realización de las muestras de PMMA, siguiendo las instrucciones del fabricante. Las superficies de las muestras fueron pulidas con una pieza de mano de baja velocidad, operando entre 1500 y 2000 rpm, se creó una tabla de Excel (Microsoft-USA), y los resultados fueron analizados con el software estadístico BioStat 5.3 (Brasil) mediante la prueba T de Student (p < 0,05). Resultados: Los valores obtenidos fueron menores o iguales a 0,2 μm, sin diferencias estadísticamente significativas entre ambos grupos (p > 0,05). Conclusión: Los resultados de este estudio destacan que ambos materiales son completamente aceptables para el uso en odontología. Se recomienda realizar investigaciones adicionales que evalúen la rugosidad superficial.

Descargas

Los datos de descargas todavía no están disponibles.

Detalles del artículo

Cómo citar
Taimal Valencia, K. M., & Garrido Villavicencio, P. R. (2025). Resina fotopolimerizable para impresora 3D, resinas a base de PMMA de termocurado, cámara de post-polimerización, rugosidad superficial, pulido. Revista Ecuatoriana De Pediatría, 26(1), 4-18. https://doi.org/10.52011/RevSepEc/e321
Sección
Artículos Originales
Biografía del autor/a

Karen Mireya Taimal Valencia, Universidad Central del Ecuador

Universidad Central del Ecuador; Quito, Ecuador

Pablo Ruben Garrido Villavicencio, Universidad Central del Ecuador

Universidad Central del Ecuador; Quito, Ecuador

Citas

López G. Rugosidad superficial de resinas Bulk Fill frente a la acción de dos tipos de enjuagues bucales”. Estudio in vitro [Internet]. [Quito]: Universidad Central del Ecuador; 2019. Disponible en: https://www.dspace.uce.edu.ec/server/api/core/bitstreams/654e440e-f562-4bdc-96eb-a6334a240afd/content

Salgado H, Gomes A, Duarte A, Ferreira J, Fernandes C, Figueiral M, et al. Antimicrobial Activity of a 3D-Printed Polymethylmethacrylate Dental Resin Enhanced with Graphene. Biomedicines [Internet]. 10(2607). Disponible en: https://www.mdpi.com/2227-9059/10/10/2607

Roig M, Gagliani M. Introducción a la odontología digital. Grupo Asís Biomedia S.L.; 2021. 300 p.

Namano S, Kanazawa M, Katheng A, Trang BNH, Hada T, Komagamine Y, et al. Effect of support structures on the trueness and precision of 3D printing dentures: An in vitro study. J Prosthodont Res. 2024;68(1):114-21.

Díez-Pascual AM. PMMA-Based Nanocomposites for Odontology Applications: A State-of-the-Art. Int J Mol Sci. 7 de septiembre de 2022;23(18):10288.

Ertugrul M, Bakir S, Ozcan N. An evaluation of the effect on streptococcus mutans adhesion of surface roughness in different aesthetic restorative materials. Cumhuriyet Dental Journal. 27(4).

Karina Briseño Medrano. ANALISIS DEL USO ODONTOLÓGICO DEL PMMA COMBINADO CON GRAFENO PARA LA ELABORACIÓN DE PRÓTESIS TOTALES. [Internet]. [MÉXICO, Cd. Mx.]: Universidad Nacional Autónoma de México.; Disponible en: https://ru.dgb.unam.mx/bitstream/20.500.14330/TES01000839958/3/0839958.pdf

Chiayi Shen, H., Ralph Rawls, Josephine F., Esquivel-Upshaw. Phillips CIENCIAS de los MATERIALES DENTALES [Internet]. 13.a ed. Avda. Tarradellas, Barcelona España: ELSEVIER; Disponible en: https://books.google.com.ec/books?id=ktFvEAAAQBAJ&pg=PA236&dq=fase+arenosa+del+pmma+en+odontologia&hl=es&newbks=1&newbks_redir=1&sa=X&ved=2ahUKEwiDh-_Qt5qHAxWdTDABHRe4BvsQ6wF6BAgBEAE

José Luis Cova N. BIOMATERIALES DENTALES [Internet]. Primera. AMOLCA; Disponible en: https://uceedu-my.sharepoint.com/personal/jdelvalle_uce_edu_ec/Documents/Libros/Libros%20Materiales%20Dentales/Biomateriales%20Dentales%20-%20Cova.pdf

DAIANE PEREIRA CAMACHO, TEREZINHA INEZ ESTIVALET SVIDZINSK, MÁRCIA CRISTINA FURLANETO, MURILO BAENA LOPES, GIOVANI DE OLIVEIRA CORRÊA. RESINAS ACRÍLICAS DE USO ODONTOLÓGICOÀ BASE DE POLIMETILMETACRILATO. BJSCR. 6(3):63-72.

HUGE DENTAL MATERIAL CO., LTD. Ficha de Datos de Seguridad [Internet]. Disponible en: https://d3tfk74ciyjzum.cloudfront.net/proclinic-es/annexes/h53545msds_es_.pdf

Federico Humberto Barceló Santana, Jorge Mario Palma Calero. MATERIALES DENTALES CONOCIMIENTOS BÁSICOS APLICADOS [Internet]. 3a ed. MÉXICO: TRILLAS; 227-230 p. Disponible en: https://es.scribd.com/document/358300515/Materiales-Dentales-Barcelo-PDF

Bertana V, De Pasquale G, Ferrero S, Scaltrito L, Catania F, Nicosia C, et al. 3D Printing with the Commercial UV-Curable Standard Blend Resin: Optimized Process Parameters towards the Fabrication of Tiny Functional Parts. Polymers. febrero de 2019;11(2):292.

Lee EH, Ahn JS, Lim YJ, Kwon HB, Kim MJ. Effect of post-curing time on the color stability and related properties of a tooth-colored 3D-printed resin material. J Mech Behav Biomed Mater. 1 de febrero de 2022;126:104993.

Li P, Lambart AL, Stawarczyk B, Reymus M, Spintzyk S. Postpolymerization of a 3D-printed denture base polymer: Impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity. J Dent. diciembre de 2021;115:103856.

Bayarsaikhan E, Gu H, Hwangbo NK, Lim JH, Shim JS, Lee KW, et al. Influence of different postcuring parameters on mechanical properties and biocompatibility of 3D printed crown and bridge resin for temporary restorations. J Mech Behav Biomed Mater. abril de 2022;128:105127.

Chen H, Hou JP, Lee SY, Lin YM. Effects of postpolymerization time and temperature on the flexural properties and hardness profile of three-dimensional printed provisional resin. J Dent Sci. enero de 2024;19(1):455-60.

Billings C, Siddique R, Liu Y. Photocurable Polymer-Based 3D Printing: Advanced Flexible Strain Sensors for Human Kinematics Monitoring. Polymers (Basel). 20 de octubre de 2023;15(20):4170.

Singh R, Gupta A, Tripathi O, Srivastava S, Singh B, Awasthi A, et al. Powder bed fusion process in additive manufacturing: An overview. Materials Today: Proceedings. 2020;26:3058-70.

Ochoa JP. New Stetic S.A. 2024 [citado 12 de julio de 2024]. IMPRESIÓN 3D DENTAL: TRANSFORMANDO LA ODONTOLOGÍA MODERNA. Disponible en: https://www.newstetic.com/articulos/impresion-3d-dental-transformando-la-odontologia-moderna/

Pérez Sevilla M, Rivas Navazo F, Sánchez Ortega PL. Manual de Impresión 3D Resina. 2024 [citado 12 de julio de 2024]; Disponible en: https://riubu.ubu.es/handle/10259/9171

Tian Y, Chen C, Xu X, Wang J, Hou X, Li K, et al. A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications. Scanning. 17 de julio de 2021;2021:9950131.

Kim GT, Go HB, Yu JH, Yang SY, Kim KM, Choi SH, et al. Cytotoxicity, Colour Stability and Dimensional Accuracy of 3D Printing Resin with Three Different Photoinitiators. Polymers. 2022;14(5):undefined-undefined.

Toaza Paucar, Adriana Elizabeth. “RUGOSIDAD SUPERFICIAL DE RESINAS COMPUESTAS MEDIANTE SISTEMAS DE PULIDO” [Internet]. [Riobamba]: Universidad Nacional de Chimborazo; 2023. Disponible en: http://dspace.unach.edu.ec/bitstream/51000/11178/1/Toaza%20Paucar%2C%20A%282023%29Rugosidad%20superficial%20de%20resinas%20compuestas%20mediante%20sistemas%20de%20Pulido%28Tesis%20de%20Pregrado%29%20Universidad%20Nacional%20de%20Chimborazo%2C%20Riobamba%2C%20Ecuador.pdf

Urresta García Diego Ricardo. Rugosidad superficial de ionómero de vidrio convencional adicionado con teobromina cristalina al 1%. Estudio in vitro. [Internet]. [Quito]: Universidad Central del Ecuador; 2020. Disponible en: https://www.dspace.uce.edu.ec/server/api/core/bitstreams/15650558-a96b-46ac-9744-e08e1a7f6570/content

Al-Dwairi ZN, Tahboub KY, Baba NZ, Goodacre CJ, Özcan M. A Comparison of the Surface Properties of CAD/CAM and Conventional Polymethylmethacrylate (PMMA). J Prosthodont. abril de 2019;28(4):452-7.

Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. julio de 1997;13(4):258-69.

Aydın N, Topçu FT, Karaoğlanoğlu S, Oktay EA, Erdemir U. Effect of finishing and polishing systems on the surface roughness and color change of composite resins. J Clin Exp Dent. mayo de 2021;13(5):e446-54.

Postiglione G. Smart Materials and Additive Manufacturing [Internet]. Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”; 2017. Disponible en: file:///C:/Users/home/Downloads/2017_03_PhD_Postiglione.pdf

Careño A, Torres M, Ramírez M, Núñez J. A comparative Study to Evaluate the Subtractive and Additive Process in Dentistry: A Systematic Review. Ingenierías USBmed [Internet]. 15(1). Disponible en: file:///C:/Users/home/Downloads/Dialnet-UnEstudioComparativoParaEvaluarElProcesoSustractiv-9574340.pdf

Quezada M, Gomes C, Martín J, Correia A, Fonseca P. Influence of different processing techniques for prosthetic acrylic resins in the surface roughness parameters: a research article. BMC Oral Health [Internet]. Disponible en: https://pubmed.ncbi.nlm.nih.gov/38816807/

Jung YH, Kong HJ, Kim YL. Effect of fabrication method and surface polishing on the surface roughness and microbial adhesion of provisional restoration. J Dent Rehabil Appl Sci. 40(3):149-58.

Vichi A, Mura G, Vannini F, Baldani S, Paolone G, Goracci C. Effects of Repolishing Systems on Surface Characteristics of a 3D-Printed Permanent Material. Appl Sci [Internet]. 15(171). Disponible en: https://www.mdpi.com/2076-3417/15/1/171

Unkovsky A, Fernandez P, Benkendorff V, Klink A, Spintzyk S. Surface Characteristics of Milled and 3D Printed Denture Base Materials Following Polishing and Coating: An In-Vitro Study. MDPI [Internet]. 13. Disponible en: file:///C:/Users/USER-PC/Downloads/materials-13-03305.pdf

Meneghello R, Di Fiore A, Brun P, Rosso S, Gattazzo A, Stellini E, et al. Comparison of the flexural and surface properties of milled, 3D-printed, and heat polymerized PMMA resins for denture bases: An in vitro study. J Prosthodont Res. 66(3):502-8.